Fluorine Removal tech
- High selective resin
- Supporting equipment
- simple operating
- High removal rate
- Low residual<1ppb
- long working life
MCR60- fluorine removal resin
Macroporous chelating resin contains aluminium oxide
MCR60 is a macroporous chelating resin with polystyrene matrix and contains aluminium oxide. It shows a high selectivity to fluorine.
Since common anion exchange resin have a less selectivity.
ClO4->I->CrO42->SO42- >Br- >CN->NO3- > Cl- > F-
So, it is necessary to exploit MCR60 resin with a unique selectivity to fluorine.
The particle size is in standard gaussian distribution with 0.315-1.25mm >95%.
MCR60 shows good mechanical strength and outstanding operation capacity and long service life.
MCR60 is working in pH 7-9, at 10-30m/h flow rate. And regenerated by 2-3BV 5% Al2(SO4)3 within 1 hour.
MCR60 is used to remove fluorine from underground water, and reduce the fluorine concentration to less than 1ppb.
MCR60 could be used in fluorine removal from wastewater.
- Application: fluorine removal
- Matrix: ST/DVB
- Type: Macroporous
- Functional group: aluminium oxide
- Ionic form: neutral
- Appearance: light yellow opaque Spherical beads
Physical and Chemical Properties:
1 Total exchange capacity (g/L) ≥2
2 Moisture retention (%) 50-60
3 Particle size range (%) 0.315-1.25 mm ≥95
4 Whole beads (%) ≥96
5 Shipping weight (g/ml) 0.72-0.78
6 Specific gravity (g/ml) 1.10-1.20
7 Uniformity coefficient <1.6